|
|
发表于 2024-1-27 06:59:31
|
显示全部楼层
本帖最后由 jmg 于 2024-1-27 07:01 编辑
T11 is a nice addition, but it seems to lack a feed from XOSC ?
That means you cannot calibrate an operating HIRC from a crystal, you need to reconfigure SYSCLK to XOSC, then measure HIRC, then restore SYSCLK to HIRC.
That disturbs SYSCLK, whilst another MUX connection could have avoided that.
Are there any limits on T11 clock ratios ?
eg can SYSCLK of 11.0592MHz from XOSC, read a 44MHz HIRC OK ?
Also, T11 has 16b-RELOAD but no 16b-CAPTURE mode ?
|
|
|手机版|深圳国芯人工智能有限公司
( 粤ICP备2022108929号-2 )
发表于 2024-1-26 16:10:39
