STC32G四轴飞控里的遥控器代码编译错误

志在***

Build started: Project: remote
Build target 'Target 1'
compiling task2m.c...
config.h(23): warning C318: can't open file 'binary.h'
TASK2M.C(102): error C202: 'B1110_0000': undefined identifier
TASK2M.C(103): error C202: 'B0000_1110': undefined identifier
TASK2M.C(119): error C202: 'B1110_0000': undefined identifier
TASK2M.C(120): error C202: 'B0000_1110': undefined identifier
compiling NRF24L01-V21.C...
config.h(23): warning C318: can't open file 'binary.h'
NRF24L01-V21.C(96): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(97): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(98): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(99): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(100): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(101): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(102): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(103): error C202: 'WRITE_REG': undefined identifier
NRF24L01-V21.C(237): error C202: 'WRITE_REG': undefined identifier
compiling main-OLED-V12.C...
config.h(23): warning C318: can't open file 'binary.h'
MAIN-OLED-V12.C(214): error C202: 'bit6': undefined identifier
MAIN-OLED-V12.C(259): error C187: not an lvalue
MAIN-OLED-V12.C(329): error C187: not an lvalue
MAIN-OLED-V12.C(422): error C202: 'bit6': undefined identifier
MAIN-OLED-V12.C(676): error C202: 'B0011_1011': undefined identifier
Target not created.
Build Time Elapsed:  00:00:00

梁***

整理文件时，手误，插入了一个b，去掉即可：



binary.h整理文件也删掉了，下载到目下即可。

我重新处理、编译后了，下载覆盖代替原来的压缩包，重新解压缩。
四轴飞控-STC32G12K128-LQFP48.rar (551.18 KB, 下载次数: 73)

2023-3-30 16:17 上传

点击文件名下载附件

志在***

正常编译了，谢谢梁工。哪里能买套件？

神***

楼上你自己生产了淘宝卖，资料是全套开源的