想把80C52的OLED代码移植到STC8H1K08T上去，但是没成功 | 从我们成熟的STC8H程序开始
想把51的OLED代码移植到STC8H1K08T上去，但是没成功，找不到原因，求大神指导。文件我附上去，STC8H1K08T对应的scl为P1.5.SDL对应P1.4口。我有点怀疑问题出在REG52.H头文件：/*--------------------------------------------------------------------------
REG52.H
Header file for generic 80C52 and 80C32 microcontroller.
Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
All rights reserved.
--------------------------------------------------------------------------*/
#ifndef __REG52_H__
#define __REG52_H__
/*BYTE Registers*/
sfr P0 = 0x80;
sfr P1 = 0x90;
sfr P2 = 0xA0;
sfr P3 = 0xB0;
sfr PSW = 0xD0;
sfr ACC = 0xE0;
sfr B = 0xF0;
sfr SP = 0x81;
sfr DPL = 0x82;
sfr DPH = 0x83;
sfr PCON= 0x87;
sfr TCON= 0x88;
sfr TMOD= 0x89;
sfr TL0 = 0x8A;
sfr TL1 = 0x8B;
sfr TH0 = 0x8C;
sfr TH1 = 0x8D;
sfr IE = 0xA8;
sfr IP = 0xB8;
sfr SCON= 0x98;
sfr SBUF= 0x99;
/*8052 Extensions*/
sfr T2CON= 0xC8;
sfr RCAP2L = 0xCA;
sfr RCAP2H = 0xCB;
sfr TL2 = 0xCC;
sfr TH2 = 0xCD;
/*BIT Registers*/
/*PSW*/
sbit CY = PSW^7;
sbit AC = PSW^6;
sbit F0 = PSW^5;
sbit RS1 = PSW^4;
sbit RS0 = PSW^3;
sbit OV = PSW^2;
sbit P = PSW^0; //8H1K08T only
/*TCON*/
sbit TF1 = TCON^7;
sbit TR1 = TCON^6;
sbit TF0 = TCON^5;
sbit TR0 = TCON^4;
sbit IE1 = TCON^3;
sbit IT1 = TCON^2;
sbit IE0 = TCON^1;
sbit IT0 = TCON^0;
/*IE*/
sbit EA = IE^7;
sbit ET2 = IE^5; //8052 only
sbit ES = IE^4;
sbit ET1 = IE^3;
sbit EX1 = IE^2;
sbit ET0 = IE^1;
sbit EX0 = IE^0;
/*IP*/
sbit PT2 = IP^5;
sbit PS = IP^4;
sbit PT1 = IP^3;
sbit PX1 = IP^2;
sbit PT0 = IP^1;
sbit PX0 = IP^0;
/*P3*/
sbit RD = P3^7;
sbit WR = P3^6;
sbit T1 = P3^5;
sbit T0 = P3^4;
sbit INT1= P3^3;
sbit INT0= P3^2;
sbit TXD = P3^1;
sbit RXD = P3^0;
/*SCON*/
sbit SM0 = SCON^7;
sbit SM1 = SCON^6;
sbit SM2 = SCON^5;
sbit REN = SCON^4;
sbit TB8 = SCON^3;
sbit RB8 = SCON^2;
sbit TI = SCON^1;
sbit RI = SCON^0;
/*P1*/
sbit T2EX= P1^1; // 8052 only
sbit T2 = P1^0; // 8052 only
/*T2CON*/
sbit TF2 = T2CON^7;
sbit EXF2 = T2CON^6;
sbit RCLK = T2CON^5;
sbit TCLK = T2CON^4;
sbit EXEN2= T2CON^3;
sbit TR2 = T2CON^2;
sbit C_T2 = T2CON^1;
sbit CP_RL2 = T2CON^0;
#endif
你从我们成熟的STC8H程序开始
OLED12864-GUI/U8g2-科学计算器 国芯技术交流网站 - STC全球32位8051爱好者互助交流社区 (stcaimcu.com)
可以参考ssd1306的stc8h的例程，这个不是很多。为什么一定要移植过来。 soma 发表于 2024-7-13 11:15
可以参考ssd1306的stc8h的例程，这个不是很多。为什么一定要移植过来。
这个例程在哪里可以找到呢 oyufei 发表于 2024-7-13 11:24
这个例程在哪里可以找到呢
可以看这个系列《一起玩OLED屏幕》高清版-Part1-点亮OLED屏幕
页:
[1]