擎天柱学习：《8051U深度入门到32位51大型实战教学视频》，打卡

芯芯向荣up 发表于 2024-12-24 16:37:53

#include "AI8051U.h"

void main(void)
{
   P2M0 = 0;
   P2M1 = 0;


   while(1)
   {

            P20 = 0;
            P21 = 0;

   }
}

芯芯向荣up 发表于 2024-12-24 17:01:18

擎天柱第四集不停电下载

#include "AI8051U.h"
#include "stc32_stc8_usb.h"

char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";

void main(void)
{

   P_SW2 |= 0x80;

P0M1 = 0x00; P0M0 = 0x00;
P1M1 = 0x00; P1M0 = 0x00;
P2M1 = 0x00; P2M0 = 0x00;
P3M1 = 0x00; P3M0 = 0x00;
P4M1 = 0x00; P4M0 = 0x00;
P5M1 = 0x00; P5M0 = 0x00;
P6M1 = 0x00; P6M0 = 0x00;
P7M1 = 0x00; P7M0 = 0x00;

usb_init();

   IE2 |= 0x80;
EA = 1;

      while (DeviceState != DEVSTATE_CONFIGURED);

   while(1)
   {

            if (bUsbOutReady)
   {
         USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）

         usb_OUT_done();
   }
            P20 = 0;
            P22 = 0;



   }
}

芯芯向荣up 发表于 2024-12-25 14:01:06

擎天柱第五集 C语言基础

#include "AI8051U.h"
#include "AI_usb.h"
#define u8unsigned char
#define u16 unsigned int
u8 X = 66;
u8 Y = 6;
char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";
void main(void)
{
P_SW2 |= 0x80;
P0M1 = 0x00; P0M0 = 0x00;
P1M1 = 0x00; P1M0 = 0x00;
P2M1 = 0x00; P2M0 = 0x00;
P3M1 = 0x00; P3M0 = 0x00;
P4M1 = 0x00; P4M0 = 0x00;
P5M1 = 0x00; P5M0 = 0x00;
P6M1 = 0x00; P6M0 = 0x00;
P7M1 = 0x00; P7M0 = 0x00;
usb_init();
IE2 |= 0x80;
EA = 1;
while (DeviceState != DEVSTATE_CONFIGURED);
while(1)
{
if (bUsbOutReady)
   {
         USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）
         if(X>Y)
{
printf("条件为真\r\n");
}
else
{
   printf("条件为假\r\n");
}
         usb_OUT_done();
   }
}
}

芯芯向荣up 发表于 2024-12-25 14:40:11

擎天柱第六集 io口输入输出

#include "AI8051U.h"
#include "AI_usb.h"
#include "intrins.h"

#define u8unsigned char
#define u16 unsigned int

u8 state=0;

char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";

void Delay20ms(void) //@24.000MHz
{
unsigned long edata i;

_nop_();
_nop_();
i = 119998UL;
while (i) i--;
}

void main(void)
{
WTST = 0;//设置程序指令延时参数，赋值为0可将CPU执行指令的速度设置为最快
EAXFR = 1; //扩展寄存器(XFR)访问使能
CKCON = 0; //提高访问XRAM速度

P0M1 = 0X00; P0M0 =0X00;
P1M1 = 0X00; P1M0 =0X00;
P2M1 = 0X00; P2M0 =0X00;
P3M1 = 0X00; P3M0 =0X00;
P4M1 = 0X00; P4M0 =0X00;
P5M1 = 0X00; P5M0 =0X00;
P6M1 = 0X00; P6M0 =0X00;
P7M1 = 0X00; P7M0 =0X00;

usb_init();

IE2 |= 0x80;
EA = 1;

while (DeviceState != DEVSTATE_CONFIGURED);

while(1)
{
if (bUsbOutReady)

   {
         //USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）

         usb_OUT_done();
   }

//按一下灯亮，按一下灯灭
if( P32 == 0 ) //判断P32按钮是否按下
{
Delay20ms();
if( P32 == 0 )
{
state = !state;
P20 = state;
printf("state:%d\r\n",(int)state);

while( P32 == 0 ); //等待P32松开

}
}

}
}

芯芯向荣up 发表于 2024-12-26 09:53:44

擎天柱第七集定时器中断

#include "AI8051U.h"
#include "AI_usb.h"
#include "intrins.h"

#define u8unsigned char
#define u16 unsigned int

u8 state=0;
u8 Run_State=0;    //运行状态

char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";

void Delay20ms(void) //@24.000MHzDelay20ms();
{
unsigned long edata i;

_nop_();
_nop_();
i = 119998UL;
while (i) i--;
}
void Timer0_Init(void); //3秒@24.000MHz //函数声明

void main(void)
{
int count=1; //按键计数变量

WTST = 0; //设置程序指令延时参数，赋值为0可将CPU执行指令的速度设置为最快
EAXFR = 1; //扩展寄存器(XFR)访问使能
CKCON = 0; //提高访问XRAM速度

P0M1 = 0x00; P0M0 = 0x00;
P1M1 = 0x00; P1M0 = 0x00;
P2M1 = 0x00; P2M0 = 0x00;
P3M1 = 0x00; P3M0 = 0x00;
P4M1 = 0x00; P4M0 = 0x00;
P5M1 = 0x00; P5M0 = 0x00;
P6M1 = 0x00; P6M0 = 0x00;
P7M1 = 0x00; P7M0 = 0x00;

usb_init();

IE2 |= 0x80;

EA = 1;

P40 = 0;

while (DeviceState != DEVSTATE_CONFIGURED);

while(1)
{

   if (bUsbOutReady)
   {
         //USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）

         usb_OUT_done(); //
   }

if( P32 == 0 )
{
Delay20ms(); //延时20ms消抖
if( P32 == 0 )
{

P20 = 0;
Timer0_Init();
while( P32 == 0 );

}
}

//
//任务：救护车灯控制器
if( P32 == 0 )
{
Delay20ms(); //延时20ms消抖
if( P32 == 0 )
{
Run_State = !Run_State; //运行状态取反

if( Run_State==1 )
{
Timer0_Init();
}
else
{
TR0 = 0;
P20 = 1;
P21 = 1;
}
while( P32 == 0 );

}
}

}
}

void Timer0_Init(void) //500毫秒@24.000MHz
{
TM0PS = 0x0F; //设置定时器时钟预分频 ( 注意:并非所有系列都有此寄存器,详情请查看数据手册 )
AUXR &= 0x7F; //定时器时钟12T模式
TMOD &= 0xF0; //设置定时器模式
TL0 = 0xDC; //设置定时初始值
TH0 = 0x0B; //设置定时初始值
TF0 = 0; //清除TF0标志
TR0 = 1; //定时器0开始计时
ET0 = 1; //使能定时器0中断
}

void Timer0_Isr(void) interrupt 1 //3秒执行一次
{
state = !state;

P20 = state;
P21 = !state;
}

芯芯向荣up 发表于 2024-12-27 10:53:59

第8集定时器周期性调度任务

#include "io.h"
u8 State1=0;
u8 State2=0;
u8 State3=0;

u16 Key_Vol;

void LED0_Blink(void)
{
   State1=!State1;
   P20=State1;
}
void LED1_Blink(void)
{
   State2=!State2;
   P21=State2;
}
void LED2_Blink(void)
{
   State3=!State3;
   P22=State3;
}

voidKey_Task(void)
{
   if( P32==0 )
   {
            Key_Vol++;
            if(Key_Vol == 5)
            {
                     //按键按下的任务
                     printf("按键单击\r\n");
            }
   }
   else
   {
            Key_Vol = 0;
   }
}

芯芯向荣up 发表于 2024-12-27 11:32:56

第9集：擎天柱，虚拟接口显示——LED和数码管

#include "config.h"
#include "task.h"
#include "io.h"

char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";

void main(void)
{

Sys_int(); //系统初始化
usb_init();

IE2 |= 0x80;
Timer0_Init ();          //定时器初始化

EA = 1;

while (DeviceState != DEVSTATE_CONFIGURED);

while(1)
{
if (bUsbOutReady)

   {
         //USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）

usb_OUT_done();

}
Task_Pro_Handler_Callback();                //执行功能函数

}
}

void Timer0_Isr(void) interrupt 1       //3秒执行一次
{
Task_Marks_Handler_Callback();

}

芯芯向荣up 发表于 2024-12-27 11:38:43

第十集：虚拟LED和数码管

点亮P20端口

任务一:：P2口流水灯，P10闪烁

任务2：左边数码管显示p32按下次数，右边数码管显示p33按下次数

任务3：按下数字按键在数码管显示对应的数字按键

#include "config.h"
#include "task.h"
#include "io.h"

char *USER_DEVICEDESC = NULL;
char *USER_PRODUCTDESC = NULL;
char *USER_STCISPCMD = "@STCISP#";

extern u32 REC_NUM;

void main(void)
{

Sys_int(); //系统初始化
usb_init();

IE2 |= 0x80;
Timer0_Init ();          //定时器初始化
EA = 1;

P40 = 0;

while (DeviceState != DEVSTATE_CONFIGURED);

while(1)
{
if (bUsbOutReady)

   {
REC_NUM=UsbOutBuffer-48;
         //USB_SendData(UsbOutBuffer,OutNumber); //发送数据缓冲区，长度（接收数据原样返回, 用于测试）

usb_OUT_done();

}
Task_Pro_Handler_Callback();                //执行功能函数

}
}

void Timer0_Isr(void) interrupt 1       //3秒执行一次
{
Task_Marks_Handler_Callback();

}

芯芯向荣up 发表于 2025-1-7 16:46:20

小陈数码发表于 2025-1-6 22:59
学习一下，我写的没有成功。

你可以把冲哥的程序包下载下来对比一下，看一下哪段出了问题

sunguest 发表于 2025-2-8 14:48:00

今天在聂总的帮助下，总算和电脑连好了。

页: [1]

国芯技术交流网站's Archiver

擎天柱学习：《8051U深度入门到32位51大型实战教学视频》，打卡